Amplificator integrat hibrid 12W A Class – Synthesis SOPRANO
7.499,00 lei
Soprano este un amplificator integrat oarecum minimalist, cu un preamplificator solid-state și un etaj final de 12W A Class care utilizează tuburi EL84. Proiectată şi produsă de italieni, micuţă şi elegantă, realizată fără compromisuri, având incorporat chiar şi un convertor digital-analog, această bijuterie electronică poate satisface cele mai rafinate gusturi în materie de sunet.
Garanţie: 24 luni
Technical Specifications:
USB Input
Optical Input Coax Input
Line Input
Phono Input (MM) Ground
Power stage (1 ch.): Matched pair EL84/6BQ5
Input stage (1 ch.): Hi Performance audio OP-AMP JRC4580
Driver (1 ch.): Matched pair MJD340 (Designed for audio amplifier)
Input impedance: 100Kohm
Input sensitivity: 100mV RMS for rated power
Output tap: 6 Ohm
Power stage config.: Push-Pull Ultra Linear 43% tap
Power output: 12W RMS into 6 ohm A Class
Power Bandwidth: 15Hz to 50KHz – 3,0dB
Frequency response: 20Hz to 20KHz – 0,5dB
Distortion: 1% @ 1KHz max power (12W)
Signal/Noise ratio: >90dB A weighted
230VAC 50Hz -120VAC 60Hz – 80W maximum
310 x 295 x 150mm (12,2” x 11,6” x 5,9”)
10,0 Kg (22.0 lbs)
Synthesis Soprano .PDF
Produs în stoc
Trebuie să fii autentificat pentru a publica o recenzie.
Produse recomandate
-
9.999,00 lei
Dezvoltat de echipa din Marea Britanie Roksan Attessa Streaming poate fi controlat de aplicația BluOS. Este optimizat pentru toată muzica și toate dispozitivele dintr-un singur cadran de control intuitiv, pentru un sunet amplificat și simplificat.
Garanţie: 24 luni
Technical Specifications:
Power Output into 8 Ohm
80W Both Channels Driven, Nominal (THD+N <0.1%)
Power Output into 4 Ohm
130W Both Channels Driven, Nominal (THD+N <0.1%)
Inputs (Digital)
Digital 1 (D1) – Coax SPDIF (up to 192kHz/24bit)
Digital 2 (D2) – Optical SPDIF (max. 96kHz/24bit)
Digital 3 (TV) – Optical SPDIF (max. 96kHz/24bit)
Digital 4 (CD) – Coax SPDIF (up to 192kHz/24bit)
Digital 5 (Bluetooth) – Bluetooth (48kHz/16bit)
Inputs (Analogue)
A1 – No signal sense
A2 – With signal sense & used for AV Mode
MM (Phono) – RIAA (equalised)
Outputs
1x pair Speaker binding posts (L&R)
1x pair of RCA Analogue (Pre-out/SUB)
3.5mm Stereo mini-jack headphone socket – 7.5Vrms drive suitable for all headphone types including high-impedance
Other
IEC mains power socket (3 pin)/Fuse holder
3.5mm mini-Jack – 12v trigger Input (On / Standby)
IR wired input 3.5mm jack
Construction
Formed Plated steel and bespoke machined anodised aluminium front panel.
Primary Interface (on unit)
Dynamic Control Dial (with haptic feedback) to control volume and inputs
Secondary Interface (on unit)
Standby, Backward, Play/Pause, Forward
Other Interface
IR remote
Bluetooth
A2DP Audio profile / Codecs: SBC, aptX & AAC Bluetooth Range: 15m (typical)
Digital Coax Input
up to 24bit/192kHz PCM
Digital Optical Input
up to 24bit/96kHz PCM
MaestroUnite
System Creation and Control
Advanced System Setting
Over the Air Updates via Wi-Fi
Mains Transformer Rating
400VA
Dimensions (Including Encoder and Connections (W x H x D))
432 x 76 x 373 mm
Dimensions (Excluding Encoder and Connections (W x H x D))
432 x 76 x 346 mm
Weight
10.48 kg (23 lb)
Audio Formats
MP3, AAC, WMA, OGG, WMA-L, ALAC, OPUS
Hi-Resolution Audio Formats
MQA, FLAC, WAV, AIFF, Supports converted DSD playback via the BluOS desktop app (only)
Sampling Rate
Up to 24 bit / 192kHz
Supported Operating Systems (Minimum Spec)
Windows 7 SP1, macOS 10.9 Mavericks, iOS 9.3, Android 5.0 Lollipop or above
Supported Cloud Services
Amazon Alexa, Amazon Music, Spotify Connect, TIDAL Connect, Deezer, Qobuz, HDTracks, HighResAudio, Murfie, JUKE, Napster, Slacker Radio, KKBox, Bugs
Free Internet Radio
TuneIn Radio, iHeartRadio, Calm Radio, Radio Paradise
Control Integrations
Crestron, Control4 (OS 3), Control4 (2.9.1), RTI, URC, Push, Lutron, ELAN, iPort
Format Support / Sampling Rate
PCM / up to 192KHz/24bitAmplificator integrat Roksan Attessa Streaming
9.999,00 lei Adaugă în coșPrevizualizare -
7.699,00 lei
Amplificatorul integrat K3 de la Roksan livrează o putere de ieșire de 140 W (RMS) pe canal (în 8 ohmi) şi creează o scenă largă şi detaliată, oferind o experiență muzicală cu adevărat captivantă. O intrare phono Moving Magnet încorporată şi intrările cu cinci linii îl fac flexibil pentru toate tipurile de surse audio.
Garanţie: 24 luni
Technical Specifications:
Amplifier Type: Class-AB
Input: 5 x RCA, MM phono, Bypass
Input Impedance: 47 kohms
Line Input Senstivity: 440 mV @ 140 W / 8 ohms
Outputs: Speaker (L & R), pre-amp, 3.5 mm headphone
Power Output (Per Channel): > 140 W (8 ohms) / > 220 W (4 ohms)
Power Supply: 550 VA Toroidal transformer
Frequency Response: <3 Hz – >100 kHz (-3 dB)
Gain: 37.5 dB (75x)
Harmonic Distortion: <0.005 % (1 kHZ – 14 W @ 8 ohms)
Power Consumption: Full Power 2-CH: 8 ohms = <330 W, 4 ohms = <550 W
Signal to Noise Ratio: >90 dB (Line input)
Dimensions (W x H x D): 432 x 102 x 380 mm
Weight: 13.5 kg
Roksan K3 Amplifier Manual.PDFAmplificator integrat Roksan K3
7.699,00 lei Adaugă în coșPrevizualizare -
25.999,00 lei
Vino să-l asculţi în showroom!
Acest amplificator de înaltă performanță, cu sunet detaliat, delicat şi dinamic, scoate imediat la iveală faptul că este construit cu cele mai bune componente, fiind creat de cei obsedați de un sunet excelent pentru cei care iubesc muzica de calitate.
Garanţie: 24 luni
Technical Specifications:
DC Powered tube heater
All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.
Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
Remote control
It has a soft button design, perfectly matching the aesthetics for the “ROMA” series. It controls volume,mute and sources selection.
Feet
Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.
Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
Components
Components for the Roma 510AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.
Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
Roma510AC .PDFProdus în stoc
Amplificator integrat – Synthesis ROMA 510AC
25.999,00 lei Adaugă în coșPrevizualizare -
12.999,00 lei
Roksan Caspian M2 este un amestec sofisticat de componente ce se ascunde în spatele unei fațete din aluminiu turnat sub presiune, cu un aspect unic. Un transformator toroidal de 350 VA cu zgomot ultra-scăzut pentru amplificare și un transformator mult mai mic de 60 VA care alimentează preamplificatorul, asigură livrarea în cele mai bune condiţii a 85W/canal pe 8Ω sau 125W/canal pe 4Ω. Amplificatorul Caspian M2 are șase intrări, inclusiv două perechi de ieșiri preamplificatoare şi o conexiune XLR compatibilă cu CD player-ul Caspian M2.
Garanţie: 24 luni
Technical Specifications:
Amplifier Type: Class-AB
Inputs: RCA, XLR
Input Impedance: 38 kohms
Input Sensitivity: 240 mV rms
Output: Speakers (L & R), RCA, XLR
Power Output (Per Channel): > 85 W (8 ohms) / > 125 W (4 ohms)
Power Supply: 350 VA Power Amplifier / 60 VA Ultra low noise Toroidal transformer / Pre-amplifier section toroidal
Frequency Response: -3 dB, <3 Hz – >100 kHz
Gain: 31.6 dB
Harmonic Distortion: <0.005 % 1 kHz – 8 ohms
Signal to Noise Ratio: 100 dB (ref. 900 mV)
Power Source: 220 V – 240 V 50 Hz / 60 Hz // 100 V – 120 V 50 Hz / 60 Hz
Power Consumption: Standby: 5 W Full power / 2 channels: 8 ohms = <330 W / 4 ohms = <550 W
Dimensions (W x H x D): 432 x 80 x 330 mm (incl. feet)
Weight: 9.5 kg
Caspian Power Amplifier Manual.PDFAmplificator integrat – Roksan CASPIAN M2
12.999,00 lei Adaugă în coșPrevizualizare
Recenzii
Nu există recenzii până acum.