Amplificator integrat – Rega BRIO
4.399,00 lei
Rega BRIO este fără dubii unul dintre cele mai bune amplificatoare din lume, datorită excelentului raport dintre calitate şi preţ. Atent proiectat, construit solid şi cu piese de calitate, Rega BRIO oferă extrem de uşor un sunet bogat şi transparent în toată gama de frecvenţe.
Garanţie: 24 luni
Technical Specifications:
Power Output: 50 W into 8 Ω
Power Consumption: 195 W
Inputs: 1 x Phono input, 4 x Line inputs
Outputs: Record out
Dimensions (W x H x D): 345 x 78 x 216 mm
Weight: 5.1 kg
Brio User Manual .PDF
Produs în stoc
Trebuie să fii autentificat pentru a publica o recenzie.
Produse recomandate
-
9.999,00 lei
Dezvoltat de echipa din Marea Britanie Roksan Attessa Streaming poate fi controlat de aplicația BluOS. Este optimizat pentru toată muzica și toate dispozitivele dintr-un singur cadran de control intuitiv, pentru un sunet amplificat și simplificat.
Garanţie: 24 luni
Technical Specifications:
Power Output into 8 Ohm
80W Both Channels Driven, Nominal (THD+N <0.1%)
Power Output into 4 Ohm
130W Both Channels Driven, Nominal (THD+N <0.1%)
Inputs (Digital)
Digital 1 (D1) – Coax SPDIF (up to 192kHz/24bit)
Digital 2 (D2) – Optical SPDIF (max. 96kHz/24bit)
Digital 3 (TV) – Optical SPDIF (max. 96kHz/24bit)
Digital 4 (CD) – Coax SPDIF (up to 192kHz/24bit)
Digital 5 (Bluetooth) – Bluetooth (48kHz/16bit)
Inputs (Analogue)
A1 – No signal sense
A2 – With signal sense & used for AV Mode
MM (Phono) – RIAA (equalised)
Outputs
1x pair Speaker binding posts (L&R)
1x pair of RCA Analogue (Pre-out/SUB)
3.5mm Stereo mini-jack headphone socket – 7.5Vrms drive suitable for all headphone types including high-impedance
Other
IEC mains power socket (3 pin)/Fuse holder
3.5mm mini-Jack – 12v trigger Input (On / Standby)
IR wired input 3.5mm jack
Construction
Formed Plated steel and bespoke machined anodised aluminium front panel.
Primary Interface (on unit)
Dynamic Control Dial (with haptic feedback) to control volume and inputs
Secondary Interface (on unit)
Standby, Backward, Play/Pause, Forward
Other Interface
IR remote
Bluetooth
A2DP Audio profile / Codecs: SBC, aptX & AAC Bluetooth Range: 15m (typical)
Digital Coax Input
up to 24bit/192kHz PCM
Digital Optical Input
up to 24bit/96kHz PCM
MaestroUnite
System Creation and Control
Advanced System Setting
Over the Air Updates via Wi-Fi
Mains Transformer Rating
400VA
Dimensions (Including Encoder and Connections (W x H x D))
432 x 76 x 373 mm
Dimensions (Excluding Encoder and Connections (W x H x D))
432 x 76 x 346 mm
Weight
10.48 kg (23 lb)
Audio Formats
MP3, AAC, WMA, OGG, WMA-L, ALAC, OPUS
Hi-Resolution Audio Formats
MQA, FLAC, WAV, AIFF, Supports converted DSD playback via the BluOS desktop app (only)
Sampling Rate
Up to 24 bit / 192kHz
Supported Operating Systems (Minimum Spec)
Windows 7 SP1, macOS 10.9 Mavericks, iOS 9.3, Android 5.0 Lollipop or above
Supported Cloud Services
Amazon Alexa, Amazon Music, Spotify Connect, TIDAL Connect, Deezer, Qobuz, HDTracks, HighResAudio, Murfie, JUKE, Napster, Slacker Radio, KKBox, Bugs
Free Internet Radio
TuneIn Radio, iHeartRadio, Calm Radio, Radio Paradise
Control Integrations
Crestron, Control4 (OS 3), Control4 (2.9.1), RTI, URC, Push, Lutron, ELAN, iPort
Format Support / Sampling Rate
PCM / up to 192KHz/24bitAmplificator integrat Roksan Attessa Streaming
9.999,00 lei Adaugă în coșPrevizualizare -
25.999,00 lei
Vino să-l asculţi în showroom!
Acest amplificator de înaltă performanță, cu sunet detaliat, delicat şi dinamic, scoate imediat la iveală faptul că este construit cu cele mai bune componente, fiind creat de cei obsedați de un sunet excelent pentru cei care iubesc muzica de calitate.
Garanţie: 24 luni
Technical Specifications:
DC Powered tube heater
All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
Output transformer
The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.
Mechanical chassis construction
The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
Remote control
It has a soft button design, perfectly matching the aesthetics for the “ROMA” series. It controls volume,mute and sources selection.
Feet
Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.
Binding posts
Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
Sockets
Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
Components
Components for the Roma 510AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.
Selected tubes
All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
Roma510AC .PDFProdus în stoc
Amplificator integrat – Synthesis ROMA 510AC
25.999,00 lei Adaugă în coșPrevizualizare -
2.499,00 lei
Rega IO își propune să ofere o calitate excepțională a sunetului într-un pachet mai mic și mai eficient din punct de vedere al costurilor faţă de fratele său mai mare, mult premiatul Rega Brio. Are la bază acelaşi circuit de amplificare clasă A/B şi acelaşi preamplificator pentru doză magnetică.
Garanţie: 24 luni
Technical Specifications:
Power Output: 30 W per channel into 8 Ω
Power Consumption: 135 W
Inputs: 1 x Phono input, 2 x Line inputs
Dimensions (W x H x D): 180 x 68 x 290 mm
Weight: 2.9 kg
io User Manual .PDFProdus în stoc
Amplificator integrat – Rega IO
2.499,00 lei Adaugă în coșPrevizualizare -
9.999,00 lei
Rega Elicit-R este proiectat şi fabricat în Anglia la cele mai înalte standarde, fiind un amplificator în clasă A cu performanţe audio deosebite, incluzând un preamplificator complex pentru doză MM de înaltă calitate, dar rămânând în același timp un echipament simplu de utilizat și ușor de configurat. Ca atuuri principale acest amplificator prezintă un sunet puternic, foarte dinamic, precis şi detaliat, este versatil din punct de vedere al conectivităţii, are componente electronice selectate atent şi o construcţie robustă.
Garanţie: 24 luni
Technical Specifications:
Power Output: 105 W per channel into 8 Ω / 127 W per channel into 6 Ω
Input Sensitivity: 105 W into 8 Ω
Line Inputs (Input 1 switch set to line): 196 mV load 10 k
Phono (Input 1 switch set to phono): 2 mV load 47 k in parallel with 220 pF
Record Output: 196 mV for rated inputs
Pre-amp Output: 760 mV for rated inputs
Dimensions (W x H x D): 432 x 82 x 340 mm
Weight: 13 kg
Elicit-R User Manual .PDFProdus în stoc
Amplificator integrat – Rega ELICIT-R
9.999,00 lei Adaugă în coșPrevizualizare
Recenzii
Nu există recenzii până acum.